HMS Premium STR10, Инструкция по эксплуатации

Страница: 10 / 20

Step 3.
Parts: Cross brace (1), left
stand leg assembly from step 1, right leg
assembly from step 2, 3’’ screws 4pcs. (12),
washers 8 pcs. (11), nuts 4pcs. (10).
Tools: Hex key 7/32’’.
Attach the bottom cross brace (1) to the
rear left stabilizer (2) and rear right
stabilizer (3) using the hardware shown in
figure 3. Make sure that the narrower edge
of the cross brace (1) is closer to the stand
leg (4) uprights.
Note: Do not tighten hardware.
Step 4.
Parts: stand assembly from step 5,
towel bar (7), 1’ screws 4pcs. (15),
washers 4pcs. (11), nuts 4pcs. (10).
Tools: Hex key 7/32’’,
Wrench/Socket 9/16’’ or adjustable
wrench
1. Attach the towel bar (7) to
the left dumbbell platform
(5) and the right dumbbell platform (6) using hardware shown in figure 7. Hand
tighten screws in a cross pattern, to ensure even fit.
2. Tighten all screws securely.
Step 5.
Parts: Stand base assembly from step 4, left dumbbell platform (5), 2.75’’ screws 2pcs. (13),
washers 4pcs. (11), nuts 2pcs. (10).
Tools : Hex key 7/32’’, Wrench/Socket 9/16’’ or
adjustable wrench
Secure the left dumbbell platform (5) to left
stand leg (4) using the hardware shown in figure
5.
Note: Make sure the screw holes in the
platform are toward the center of the stand.
Fig. 3
Fig. 4
Fig. 5
Fig. 7