HMS Premium STR10, Инструкция по эксплуатации

Страница: 9 / 20

Tools required
1. Allen wrench 7/32’’
2. Socket 9/16’’
3. Wrench or adjustable wrench
4. Utility knife or scissors to cut nylon ties
Assembly
Step 1.
Parts: Stand leg (4), rear left stabilizer (2), 3’’ screws 2 pcs.
(12), washers 4 pcs. (11), nuts 2pcs. (10).
Tools: Hex key 7/32’’
Attach the rear left stabilizer (2) to the stand leg (4) using
the hardware shown in figure 1.
Note: Do not tighten hardware.
Step 2.
Parts: Stand leg (4), rear right stabilizer (3), 3’’ screws 2 pcs. (12), washers 4 pcs. (11), nuts 2
pcs. (10).
Tools: Hex key 7/32’’
Attach the rear right stabilizer (3) to the stand leg (4)
using the hardware shown in figure 2.
Note: Do not tighten hardware.
Fig. 1
Fig. 2