HMS Networks Intesis EIA-485, Руководство пользователя, Страница: 9 / 20

Intesis TM INMBSMIT001I000
User’s Manual r22 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
9 / 20
Register Address
(protocol address)
Register Address
(PLC address)
R/W Description
6 7 R/W
Window Contact
▪
0: Closed (Default)
▪
1: Open
7 8 R/W
INMBSMIT001I000 Disablement 4
▪
0: INMBSMIT001I000 enabled (Default)
▪
1: INMBSMIT001I000 disabled
8 9 R/W
AC Remote Control Disablement 4
▪
0: Remote Control enabled (Default)
▪
1: Remote Control disabled
9 10 R/W
AC unit Operation Time 4
▪
0..65535 (hours). Counts the time the AC
unit is in “On” state.
10 11 R
AC unit Alarm Status
▪
0: No alarm condition
▪
1: Alarm condition
11 12 R
Error Code 5
▪
0: No error present
▪
65535 (-1 if it is read as signed value):
Error in the communication of
INMBSMIT001I000 with the AC unit.
▪
Any other error present, see the table at the
end of this document.
22 23 R/W
Indoor unit’s ambient temperature from
external sensor (at Modbus side) 1,2,3,6
▪
-32768: (Initialization value). No
temperature is being provided from an
external sensor.
▪
Any other: (ºC/x10ºC/ºF)
23 24 R
AC Real setpoint temperature 1,2,3,6
▪
When no external temperature is provided,
this read-only register will have the same
value as register 5 (PLC address). In all
cases, it will show the current setpoint in the
indoor unit.
▪
16..32ºC (ºC/x10ºC)
▪
60..90ºF
97 98 R/W
Block Periodic Sendings 4,7,8
▪
0: Non-blocked (Default value)
▪
1: Blocked
4 This value is stored in non-volatile memory
5 See section 7 for possible error codes and their explanation
6 See section 4.2.3 for more information
7 If the register is configured as “0:Non - blocked”, all commands received from Modbus will be sent to the AC system. If “1: Blocked”,
commands from Modbus will only be sent to the AC system if they differ from the previous value
8 This register applies to firmware version 2.1 onwards