Intesis
TM
INMBSMIT001I000
User’s Manual r22
EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
5 / 20
1.
Presentation
The INMBSMIT001I000 interfaces allow a complete and natural integration of
Mitsubishi Electric
air conditioners into Modbus RTU (EIA-485) networks.
Compatible with all models of Domestic and Mr.Slim line. Check the section 6
for more information.
Reduced dimensions. 93 x 53 x 58 mm //
3.7”
x 2.1” x 2.3”
•
Quick and easy installation.
Mountable on DIN rail, wall, or even inside the indoor unit on some models of AC
.
•
External power not required.
•
Direct connection to Modbus RTU (EIA-485) networks. Up to 63 INMBSMIT001I000 devices
can be connected on the same network.
INMBSMIT001I000 is a Modbus slave device.
•
Direct connection to the AC indoor unit. Up to 1 AC indoor units can be connected to
INMBSMIT001I000.
The cable for this connection is also supplied
.
•
Configuration from both on-board DIP-switches and Modbus RTU.
•
Total Control and Supervision.
•
Real states of the AC unit's internal variables.
•
Allows simultaneous use of the
AC’s remote co
ntrols and Modbus RTU.
*
Up to 63 Intesis devices can be installed in the same Modbus RTU bus. However, the installation of Modbus Repeaters may be
required.
•
SCADA
•
PLC
•
DDC
•
BMS
•
HMI
•
Controller
•
etc
Up to 63
AC indoor
units*
Modbus RTU
EIA-485 network
Modbus RTU
Master
device
INMBSMIT001I000
INMBSMIT001I000
INMBSMIT001I000