10
III.
SYSTEM 500 OPERATION
When a customer arrives in the drive-thru lane, you will hear a
double beep in the headset. In dual-lane operation, if you are
communicating with a customer when another customer arrives in the
opposite lane, a higher pitch double beep will sound in the headset
to alert you of the second customer’s presence. When the first
customer leaves the speaker post, the same higher pitch double beep
will repeat in your headset every 4 seconds until you touch the A
button required to communicate with the second customer.
A.
Single-Lane Operation (one base station for one speaker post)
Push-To-Talk (PTT) Mode:
!
Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
!
Adjust customer’s voice level in headset if necessary.
!
Press and hold A1 or A2 button to speak to customer. — Release to
listen.
Hands-Free (HF) Mode:
!
Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
!
Adjust customer’s voice level in headset if necessary.
!
Touch and release A1 or A2 button to speak and listen to customer.
!
Touch and release A1, A2 or B button to end communication with
customer.
!
Touch and release A1 or A2 button to speak to the customer again.
!
If customer drives away from speaker post or menu board, headset
automatically stops transmitting.
Auto Hands-Free (AHF) Mode:
!
Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
!
Adjust customer’s voice level in headset if necessary.
!
Speak and listen to customer without pressing any buttons.
!
Touch and release A1, A2 or B button to end communication with
customer.
!
Touch and release A1 or A2 button to speak to the customer again.
!
If customer drives away from speaker post or menu board, headset
automatically stops transmitting.
B.
Dual-Lane Operation (two base stations for two speaker posts)
Push-To-Talk (PTT) Mode:
!
Alert tone (double beep) sounds, then customer can be heard at speaker
post or menu board.
!
Adjust customer’s voice level in headset if necessary.
!
Press and hold A1 button to speak to customer in Lane 1 or A2 button
to speak to customer in
Lane 2. — Release to listen.
Hands-Free (HF) Mode:
Содержание System 500
Страница 1: ...HME 400468 Rev 3 14 03 System 500 Wireless Drive Thru Audio System Operating Instructions ...
Страница 10: ...8 compartment until it snaps in place under the battery release latch ...
Страница 18: ...16 Circuit board may be defective Check to see if status lights on base station are lit Call HME ...
Страница 20: ...18 Figure 8 Base station circuit boards ...
