6
IV.
WEARING THE COMMUNICATOR
®
With the Communicator in its pouch and
the strap buckled over it, locate the head-
set receptacle on its top corner. Align the
key and pins of the headset connector with
the receptacle, and plug the connector
into the receptacle as shown in Figure 9.
NOTE:
Do not wiggle or twist the headset
connector when installing or removing it.
Put the Communicator belt-pac around your waist, with the Communicator in front of
either hip, so the OFF/VOLUME control and ON/POWER light are toward the front.
Fasten the belt tightly enough so it will not move around on your waist.
Place the headset on your head with the earphone on your ear and the cord behind
your shoulder. Fasten the cord clips to your clothing, behind your back. Adjust
the headset band until it fits comfortably and securely. Position the microphone
approximately two inches in front of your mouth. See Figure 10.
Figure 9.
Plug headset cable connector
into receptacle on Communicator
Figure 10.
Fasten clips to your clothing
behind your back
