HME Clear-Com FreeSpeak Edge Скачать руководство пользователя

Страница: 20 / 140

User Guide | FreeSpeak Edge Base Station

2.8

Saving and Restoring System Configuration

Clear-Com recommends that you make a backup of your system configuration using the Save

option that is available in the CCM and the front panel menu system.

2.8.1

Saving System Configuration in the CCM

The

Save

and

Restore

options are available in the CCM top navigation bar.

When you click

Save

, all system configuration; channels, roles and network details are saved to

a file (.cca) on your computer.

2.8.2

Saving System Setup in the Front Panel Menus

1. Insert a USB drive into the USB connector on the front of the Base.

2. Press the

Menu

button.

3. Using the rotary controllers, navigate to

Administration > Settings > Save

4. Push the 4th rotary controller. System setting are saved to the USB drive. The progress of

this Save is shown in the notification bar on the front panel.

2.8.3

Restoring System Configuration

Your system configuration can be restored to the Base Station at any time using the

Restore

button in the CCM and also from the front panel menu system.

On restore, the saved configuration is reapplied to the Base Station. The following aspects of

the configuration are optionally restored:

Network settings (IP addresses)

Over The Air system ID.

You do not get these options when restoring by USB directly to the Base Station. If you want to

restore system settings taken from different Stations, you must use the CCM Restore option, as

restoring directly from the Base Station in this situation would restore network and OTA system

ID and IP and could cause wireless ID conflicts.

Page 20

Содержание Clear-Com FreeSpeak Edge













































































































































Результаты поиска

Содержание Clear-Com FreeSpeak Edge

Отзывы:

Похожие инструкции для Clear-Com FreeSpeak Edge

Бренды по названию

Популярные бренды

HME Clear-Com FreeSpeak Edge, Руководство пользователя

Результаты поиска

Содержание Clear-Com FreeSpeak Edge

Отзывы:

Похожие инструкции для Clear-Com FreeSpeak Edge

Бренды по названию

Популярные бренды