HME Clear-Com ARCADIA Series, Руководство пользователя

Страница: 85 / 171

User Guide | Arcadia® Central Station
l
Each GPI/GPO hosts up to 10 different events or actions. These actions can be turned off
or on in the Status > Logic page of the CCM.
l
2 x DB 9F connectors on the rear of the Arcadia Central Station ( C ). See Rear Panel
Connectors and Indicators on page 27 .
l
For DB 9F pinouts, see Appendix A: Pinouts on page 145
5.22.2 Examples of GPIs
On an input from an external device, an audio route can be established between two entities.
l
If an on-air light comes on, the program feed ( PGM ) can be routed to a Channel or
beltpack.
l
Use a footswitch to allow the station user to open an audio route to a Channel.
l
On an input from a two-way radio, an audio route can be established to a channel (the
radio talks to the channel).
5.22.3 Examples of GPOs
GPOs are triggered (sent to an external device) when a Talk , Talk & Listen or a Call comes
into a named entity.
l
When someone talks to stage announce, an output relay (GPO) is sent to the external
stage announce speaker.
l
When someone talks to a channel labeled Radio, an output is sent to a 2-way radio.
l
When a call signal ( Call ) comes into a channel, and output is sent to turn on an on-air
light.
5.22.4 Examples of Logic Events
l
An output can be triggered on a crosspoint activation (when someone presses a talk key).
l
An input can be used to trigger a call signal.
5.22.5 Configuring GPIs
This example opens a talk route from the Arcadia Central Station to a Channel when an input
occurs on GPI1 (for instance, from a footswitch).
Navigate to Configuration > Logic .
Page 85