23
FREQUENTLY ASKED QUESTIONS
1.
Are the battery charger and base station power supplies interchangeable?
Yes
2.
What is the maximum recommended number of base stations that can be linked together
with interconnect cables?
Four
3.
Does linking the base stations automatically prevent them from interfering with each other?
No, all base that are linked together must be initialized to prevent them
from interfering with each other’s frequencies
4.
If the primary base station is turned off just momentarily (before the secondary base(s) have
a chance to start working independently), will the secondary base(s) automatically re-
initialize to the primary?
Yes, the secondary base(s) will re-establish communication without
being initialized again
5.
Will a secondary base station continue to operate if its primary is turned off for a period of time?
Yes & No. Secondary base stations will initially stop operating when
the primary base is turned off, but will resume operation independently
after about 40 seconds. Three bars will appear in its REGISTRATION
STATUS display, and its beltpacs will still be able to communicate
If the primary base station is turned back on, the secondary base must
be turned off and on again to re-establish proper initialization
6.
Can I use more than three beltpacs on a single base station in dual channel mode?
Yes, but only three users will be able to transmit at the same time
Up to 15 beltpacs can be registered to a single base station
Beltpacs and all-in-one headsets should be placed in press-to-talk mode
when more than 3 beltpacs or all-in-one headsets are used (See page 10)
7.
What should I do if my carrying case and equipment get wet?
Dry them out thoroughly before further use
Be sure all equipment is dry before using it again
CAUTION: Plugging wet electrical equipment into an AC power outlet is
dangerous!
