21
SECTION 5.
TROUBLESHOOTING
If you are unable to correct any of the problems described below or if your problem is not
covered, call 1-800-909-6604 for assistance
Power light on base station does not come on when power button is pressed
Be sure the power supply is properly connected to the base station, and the power cord is
properly connected to the power supply and electrical outlet
If operating on battery power, be sure the battery is charged and in the battery compartment
with the cover is securely closed
Beltpac/Headset power lights do not turn green and you hear “out of range”
Be sure the base station power is on
Turn beltpac/headset power on and off
Beltpac/Headset may be too far from the base station
When trying to register a beltpac/headset, you hear “registration failed”
Press the
RESET
button on the base station with the point of a pen
The
REGISTRATION STATUS
window will show “
8
” and then become blank
Try again to register the beltpac/headset
If registration fails again, call your dealer for assistance.
Other coaches can not hear me when I talk
Be sure you are pressing the
X
or
O
button on the beltpac/headset, or the
TALK
button on
the base station
Be sure you are pressing the button for the correct channel
Be sure the headset plug is properly connected to the beltpac or base station
With more than one base station, offensive spotter can not hear O or ALL
transmission from another base, or defensive spotter can not hear X or ALL
transmission from another base
Be sure interface cable is properly connected from BASE OUT on the primary base station
to BASE IN on the secondary base station, and so on
If problem is not resolved, try using a different interface cable
No or low auxiliary audio sound
Check wiring from auxiliary equipment to AUX AUDIO connector on back of the base station
Turn AUX AUDIO adjustments on front of base station with a small standard (flat) screw
driver, clockwise to increase level and counterclockwise to decrease level
