Insert the front wheel
iii) Press both brake arms towards
each other (9) , insert the
leadpipe (10) into the cage
and hook the brake cable.
ii) Connect the front motor cable
plugs (6 & 7) and hook cable
to front fork cable guides (8).
13
9
9
10
5
4
7
6
8
i) Insert the spacer which comes between
fork and motor (1) on each side of the axle.
After that, pull the wheel upwards and insert it in
the fork drop outs (2); then, insert the
safety washers (3) on each side and
and tighten bolts (4) on each side
with about 35 Nm.. Finally, press the
plastic cap (5) on each of the bolts.
3
1
2
1
