background image

Safety instructions 

 

 

Should  you  sell  this  bike  please

pass  this  user  manual  on  to  the 

new owner

 

 

 

 

 

SYMBOLS

some technical data:

 

Please  pay  particular  attention  to  the

 

Information  next  to  one  of  the  symbols

 

shown below as it can be very important 

for your personal safety.  

 

 

WARNING

 

This symbol indicates that improper

handling poses a risk to your health

ad safety

  

 

ATTENTION

 

This indicates that improper handling

could damage components and make

void the warranty. 

 

 

 

NOTE

 

Points out to useful tips.  

 

 

 

- power assistance up to 25 km/h

- range for single charge 50 - 80 km

- standard load 90 kg

- riding noise <62dB

- motor type: toothed brushless

- output power 250W

- rated voltage 36 V

- motor weight  3 kg ca.

- battery type Lithium

  36V, Ah 10

- controller type inteligent brushless

- charger input voltage 100~240 V/AC

- charger output voltage 42V

- charger output current 2A

- charging time: 4~8h 

 Do not  at any time dismantle or 

disassemble any of the above 

e-bike components!

 

Always pull the the brakes and hold the handlebar firm and straight 

before taking off in order to make sure you keep control of the bike when power 

assistance is in action! NOTE that power assistance is triggered off 

IMMEDIATELY

as soon as the foot slightly presses on the pedal.

 

 

 

For handling and maintanance of the bicycle, please refer to the 

HM Bike Owner Manual 

which is an 

integral

 part of this e-bike  owner manual!

The HM Bike Owner Manual can be downloaded from 

www.hmbike.com

Thank you for purchasing the 

HM E-RIDE Power Assisted Electric

Bicycle (EPAC). The E-RIDE features

the most recent innovation in technology

and applies to the EN 15194 standard.

For safety reasons, it is most important

that you read this User Guide BEFORE

you operate the bike. Improper handling 

can reduce its riding performance and

most importantly, pose danger to 

your safety and health!

2

HM Bike is continuously updating and

innovating this product. The printed 

manual may therefore not always

include the latest updates. However,

we shall make sure that our online

manual will always be up to date on

www.hmbike.com

Содержание E-Ride

















Отзывы: