HM Bike DHM, Руководство пользователя

Страница: 34 / 38

Warranty
34
high or low, there is a danger of falling and sustaining serious injuries!
Unless otherwise stated on the parts, the following torques apply:
Component Torque NM
Crank bolt square 34-40
Crank bolt octalink 35-50
Inside bearing shell 45-65
Pedals 35 Nm
Clamping screws A-Head stem 8 Nm
Brake fastener racing brakes 5-9 Nm
Brake fastener V brakes 8-10 Nm
Cable fixing bolt brakes 6-8 Nm
Brake pad fastener racing brakes 4-6 Nm
Rear derailleur fastening bolt 8-10 Nm
Cable fixing bolt gears 4-6 Nm
Front derailleur bolt 5-7 Nm
Cable fixing bolt front derailleur 5-7 Nm
Seat post clamping screw M6 9,5 Nm
Seat clamp screw M6 9,5 Nm
Disc brake caliper on frame 7 Nm
Brake disc on hub 4 Nm
Clamping lever of the hub quick release 9-12 Nm
Lockring of the derailleur cassettes 30-45 Nm
Bottle holder 5 Nm
The following torques apply to carbon components unless otherwise stated on the parts:
Component Torque in NM
Bottle holder 3 Nm
Front derailleur clamped fixture 3 Nm
Brake lever fastening screw 3 Nm
Stem clamp 5 Nm
Stem-fork shaft clamp 4 Nm
Shifter fastening screw 3 Nm
When assembling carbon components you have to use the appropriate assembly paste!
Using lubricants is not permitted in this case!
Air pressure in the tires
The air pressure in the tires is just as important for the riding resistance as for a safe ride. Please
ensure that your tires always have the correct pressure, otherwise the tires could come off the rims,
causing you to fall or injure yourself!
Tyre width Recommended tyre pressure
20 mm 9.0 bar 130 psi
23 mm 8.0 bar 115 psi
25 mm 7.0 bar 100 psi
28 mm 6.0 bar 85 psi
30 mm 5.5 bar 80 psi
32 mm 5.0 bar 70 psi
35 mm 4.5 bar 65 psi
37 mm 4.5 bar 65 psi
40 mm 4.0 bar 55 psi
42 mm 4.0 bar 55 psi
44 mm 3.5 bar 50 psi
47 mm 3.5 bar 50 psi
50 mm 3.0 bar 45 psi
54 mm 2.5 bar 35 psi
57 mm 2.2 bar 32 psi
60 mm 2.0 bar 30 psi
Warranty
If you have any questions concerning your warranty, you should contact the bicycle retailer where
you purchased your bicycle. The legal warranty of 2 years starts with the day you received your
bicycle, which is stated in your receipt (keep this safe!).
The best way of explaining the role of the warranty and guarantee is by using the example of parts
subject to wear. There is usually no warranty on parts subject to wear, unless a problem with this
part has been caused by a defect in the material or production. Parts subject to wear are listed in the
“Parts subject to wear” chapter.
The warranty therefore applies if:
There has been a defect in manufacturing, production, material or information •
This defect has existed since you received your bicycle •
The warranty does not apply if:
The bicycle was not “delivered” defective •
Damage has been caused by improper use, use in competition, violent use, as a result of an •
accident or other third party influences
If cleaning, servicing and repairs were not conducted properly, incorrectly or by a non-expert •
You have made subsequent changes and additions to the bicycle which were not part of the •
bicycle when you received it.
This also applies for damage which was caused when making these changes or additions with •
faulty workmanship.
We would like to wish you happy riding with your new DHM bicycle!