HM Bike DHM, Руководство пользователя

Страница: 28 / 38

Technology
28
NOTE:
Use a wheel with 3x or 4x spoke lacing. Wheels with radial lacing cannot be used because •
the spokes and the wheel can be damaged when applying the brakes and brake noise can be
generated.
You can shift gears while pedaling, but on rare occasions the pawls and ratchet inside the hub •
may produce some noise afterwards as part of normal gear shifting operation.
The CJ-8S20 cassette joint should only be used with sprockets from 16T to 23T. •
If the wheel becomes stiff and difficult to turn, you should replace the brake shoes or lubricate with •
grease.
Do not apply any lubricant to the inside of the hub, otherwise the grease will come out. •
You should periodically wash the sprockets in a neutral detergent and then lubricate them again. •
In addition, cleaning the chain with neutral detergent and lubricating it can be a effective way of
extending the useful life of the sprockets and the chain.
If the chain keeps coming off the sprockets during use, replace the sprockets and the chain. •
Parts are not guaranteed against natural wear or deterioration resulting from normal use. •
For maximum performance we highly recommend Shimano lubricants and maintenance products. •
For any questions regarding methods of handling or adjustment, please contact the place of •
purchase.
Place right hand dust cap B onto the driver on the right
side of the hub body. Next, install the sprocket and
secure it in place with the snap ring.
Installation of the sprocket to the hub
Installation of the cassette joint to the hub