HM Bike DHM, Руководство пользователя

Страница: 17 / 38

Technology
17
While holding the shoe against the rim, adjust the amount of shoe protrusion by changing over the 1.
washer B (thick or thin) so that dimension A is kept at 32 mm or more.
While holding the shoe against the rim, tighten the shoe fixing nut. 2.
Pass the inner cable through the inner cable lead, and after setting so that the total of the clearan- 3.
ces between the left and right shoes and the rim is 2 mm, tighten the cable fixing bolt.
Adjust the balance with the spring tension adjustment screws. 4.
Depress the brake lever about 10 times as far as the grip and check that everything is operating 5.
correctly and that the shoe clearance is correct before using the brakes.
Remove the shoe fixing pin, and then slide the shoe along the groove to remove it from the shoe 1.
holder.
There are two different types of shoe and shoe holder to be used in the left and right positions 2.
respectively. Slide the new shoes into the grooves on the shoe holders while taking note of the
correct directions and pin hole positions.
Insertion of shoe fixing pin is very critical to keep shoe properly fixed in place. 3.
Setting up the brakes
Replacement of the cartridge shoe