HLF Italian Design 1700, Инструкция по эксплуатации

Страница: 26 / 197

INSTALLATION
HLF Italian Design 20 I.M. HLF 1700 Eng V15-2022
3.2.2.1 Water connection
On the back of the HLF 2700 is located the inlet water valve that permits the
connection of the machine to the direct water line.
CAUTION
The water connection must only be connected to drinking water.
The maximum pressure of the water line has to be between 1 to 10 bar in order to
prevent damages to the inlet water valve. A lower pressure will not be sufficient to
open the inlet water valve, meanwhile a higher pressure will break the valve causing in
this way a water flood.
Refer to the national laws of your country for the connection to the water line.
To connect the water line to the HLF 2700, is necessary to use a tube with a
female screw of ¾ of inch at each end of it, as showed on the following picture.