HLF Italian Design 1700, Инструкция по эксплуатации

Страница: 116 / 197

SOFTWARE
HLF Italian Design 110 I.M. HLF 1700 Eng V15-2022
•
Out of coffee detection: when active, the machine will show an error when the
grinder is not grinding enough coffee to make a proper coffee ground.
•
Filling Water Parameter: when active, the water filling stops after a preset time,
usually 20 seconds.
•
Powder Test: this function allows to weight the quantity of ingredients used in a
drink. Remove the coffee group and the mixing bowl before to start the test.
•
Filling Water Control: if active, the machine checks to have the correct quantity
of water before dispensing a drink. If function is deactivated, the machine makes
beverages even if the correct level of water has not been reached.
WARNING
Before activating this option, be sure that the Minimum Requirements
indicated on paragraph 3.2.1 have been complied with, in order to avoid a
block of Fresh Milk Cleaning process.
If this function is deactivated, the user takes on the full responsibility for
any block of the machine due to any hydraulic circuit malfunctioning.
•
External Water Tank (only available on non self-cleaning machines ) :
activate this function if an External Water tank/kit is installed.
•
Soluble container (only available on non self-cleaning machines ) : activate
this function if the soluble container is installed. This function is available only if
External Water Tank option is activated.
•
Detergent tank sensor (only available on self-cleaning machines): activate
this function if the detergent tank sensor is installed.
•
Heating Control: this function controls the heating during the first start and
secure the boiler in case of extraordinary maintenance.
You can press on the arrow
→
to see more options.