HLA BR Series, Руководство оператора

Страница: 13 / 20

- 12 -
BROOM MAINTENANCE
Regular maintenance is the key to long equipment life and safe operation. It is very important that these
maintenance functions be performed as described below.
BEFORE FIRST USE
•
Inspect the attachment for shipping damage. If damage does exist, do not operate until the damaged parts have been
replaced or repaired.
BEFORE EACH USE
•
Ensure all nuts and bolts are in place and properly tightened.
•
Ensure all other fasteners are in place and are performing their specified function.
•
Ensure all hydraulic fittings are tightened and there are no leaks in any fittings or hoses.
•
Ensure all safety signs are in place, are clean and are legible.
SEE THE SAFETY SIGN SECTION (page 6)
•
Replace any damaged parts and excessively worn parts.
•
Check sweep pattern.
AFTER EVERY 8 HOURS OF OPERATION
•
Check brush pattern; adjust as necessary.
•
Check drive shaft. Lubricate universal joints with high quality grease. Tighten universal joint set screws.
MONTHLY OR AFTER EVERY 40 HOURS OF OPERATION
•
Check bearings for tightness. Tighten or replace as needed.
•
Grease all (3) lubrication points. Each grease point is identified with a label like the one shown below.
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS (
pages 3-6
of this manual)
BEFORE BEGINNING ANY BROOM MAINTENANCE OPERATION.