swings of the knob. Repeat it at least once a week. Long periods without cleaning may incapacitate
the manual cleaning systems as it jams.
Clean the boiler thoroughly and service it each time after the heating season, before long lay off, or
when occasional necessity arises. For this purpose the boiler has been facilitated with the cleaning
access openings to:
•
the burner;
•
exhaust collector;
•
exhaust collar;
•
cover of the upper exhaust collector,
You need to remove the covers of the upper collector to remove the ash accumulated there. You may
hire the authorised service to clean the collector.
The access opening to the exhaust collector is located in the ash tray chamber. Once it opened you
can access the access opening to the exhaust collar.
Always wear protection gloves and other safety gear when removing ash or cleaning the boiler.
Extinguish the boiler and wait at least one hour to cool it down before attempting any
maintenance or cleaning works
.
Only then you can open safely the doors or the access opening
and start cleaning.
7.4. Extinguishing of the
boiler
.
Switch to the extinguishing mode to extinguish the
boiler.
The controller will extinguish the
boiler
safely burning the remaining fuel out and ventilating the system. Therefore you must never unplug
the
boiler
from electric power before extinguishing ends.
Always remove fuel from the
boiler
when you stop it for longer than one day, as it may catch
moisture and from a block inside,
Remove ash and provide for ventilation of the system if you stop it for longer than one week.
Failure to do so may lead to corrosion.
Instrukcja Smart Fire
wer. 07/05/2010/ENG
HKS LAZAR
str.15
