HKC Technology Limited
2.4G Cordless Telephone System configuration guide
Page 22
On-Hook Dialing
Description
Extension can make an outgoing call in speaker mode. If the
handset is lifted when the called party answers, the system
will change the talk path to handset from the speaker.
Pause Insertion
Description
A pause can be inserted into the pre-dialing mode when
needed.
Conditions
The pause time is programmable from 0.5 sec.to 4.5 sec. in
steps of 0.5 sec.
Setting
call features configuration 5.3.2
Power Failure Transfer
Description
During power failure condition, telephone lines 1, 2 and 3 will
be automatically connected to the corresponding single line
phones (option).
Condition
A maximum of 3 sets of Corded phones can be connected to
the Main Control Base . Any of these can be used as a
normal single line phone for emergency calls.
Real Time Clock Programming
Description
The System provides a real time clock (RTC)
on the display,
which is programmed as part of the system programming.
Conditions
RTC is programmed by the extension ‘0’ and can be set
automatically and adjusted from the incoming valid Caller ID
signal.
Setting
call features configuration 1.1
