HK Audio Cadis CAD 115, Руководство пользователя, Страница: 27 / 56

27
Proceed as follows to check this: Close the cover of the voice coil housing and
reconnect the wires (red = positive, black = negative).
Feed a sine wave signal with a frequency between 1000 Hz and 1500 Hz into
the mid/high enclosure’s input. Sweep through the frequency. If you hear any
abrasive noise like crackling or scratching, the voice coil is not centered proper-
ly. Reopen the voice coil chassis and turn the voice coil a bit until it renders the
signal cleanly!
1 CADIS™ FIRNET Controller Filter Sets
Application (per side) Filter name Version Date
4 x CAD 208 Fullrange CAD208-4 fullr 1 06-01-09
4 x CAD 208 + 2 x CAD 115 CAD208-4 100Hz 1 06-01-09
6 x CAD 208 Fullrange CAD208-6 fullr 1 06-01-09
6 x CAD 208 + 3 x CAD 115 CAD208-6 100Hz 1 06-01-09
8 x CAD 208 Fullrange CAD208-8 fullr 1 06-01-09
8 x CAD 208 + 4 x CAD 115 CAD208-8 100Hz 1 06-01-09
12 x CAD 208 Fullrange CAD208-4 fullr 1 06-01-09
12 x CAD 208 + 6 x CAD 115 CAD208-4 100Hz 1 06-01-09
16 x CAD 208 Fullrange CAD208-8 fullr 1 06-01-09
16 x CAD 208 + 8 x CAD 115 CAD208-8 100Hz 1 06-01-09
Table 5: CADIS™ FIRNET filter sets as of June 2009.
You’ll find more settings and controller setups on the download pages of our
website at www.hkaudio.com.
This is to certify that
Cadis CAD 208, Cadis CAD 115 Sub
complies with the provisions of the Directive of the Council of the European
Communities on the approximation of the laws of the Member States relating to
electromagnetic compatibility according to EMC directive 2004/108/EC and low
voltage directive 2006/95/EC.
This declaration of conformity of the European Communities is the result of
an examination carried out by the Quality Assurance Department of STAMER
GmbH in accordance with European Standards EN61000-6-1, EN61000-6-2, and
EN 60065 for low voltage.
Magdeburger Str. 8, 66606 St. Wendel
Lothar Stamer Dipl.Ing.
Managing Director
St. Wendel, 06/02/2009
Version 2.0 08/2008
H Appendix/Reference Library
English