EHC-NERIS_ENG-Rev.0-23-09-2021
12
/
19
NIGHT MODE
The "Night" mode sets a value of temperature below the "Comfort"
temperature value.
It is suggested to set this operating mode during the night or when the room is
not occupied for 2 or more hours.
-Press the
[Prog]
button until the display shows the " Night" icon
-Set the desired temperature through
[+]
and
[-]
buttons.
FROST PROTECTION
In "Frost " mode the temperature is fixed to 7°C. The device activates the
heating element when the room temperature falls below 7°C. It is suggested to
set this operating mode when the room is not occupied for several days. Press
the
[Prog]
button until the display shows the "Frost " icon
2HR BOOST MODE
The "Timer 2h" mode can be used to quickly warm up the room or to speed up
towel drying.
-Press the
[Prog]
button until the display shows the "2h" icon.
The device is activated at the maximum power for 2 hours, up to a maximum
room temperature of 32°C. The
“2hr Boost” mode is automatically deactivated after a period of 2 hours and
the device returns to the operative
mode previously set. The user can switch to another operative mode at any
time by simply pressing the
[PROG]
button.
PILOT WIRE MODE
(Only for product versions equipped with "Pilot Wire".
Only France)
In "Pilot Wire" mode the device is managed by a central control system that
sets the operating mode for all the
connected devices. The device operates with the most advanced "Pilot Wire"
system with six commands, which
allows the following functions:
1.Standby: power off the heating element, the device remains active.
2.Comfort: maintains the "Comfort" temperature set by the user.
3.Eco: maintains the room temperature 3,5°C below the "Comfort"
temperature.
4.Anti-freeze: maintains the room temperature at 7°C.
5.Eco-1: maintains the room temperature 1°C below the "Comfort"
temperature.
6.Eco-2: maintains the room temperature 2°C below the "Comfort"
temperature.
The user can set the desired temperature on the device:
-Press the
[Prog]
button until the "Pilot Wire" icon is displayed.
Set the desired temperature through the
[+]
and
[-]
buttons.
