Version 1.0, 11/2017. Copyright 2012 Hitron Technologies
37
Version 1.0, 11/2017. Copyright 2017 Hitron Technologies
37
Hitron E31N2V1 User’s Guide
Figure 7:
The Spectrum Scan Screen
The following table describes the labels in this screen.
1.7.2
The Spectrum RealTime Monitor Screen
Use this to observe fluctuations in the RF signal spectrum as they happen.
Click the
RealTime Monitor
tab in the
System
:
Spectrum
screen. The following
screen displays.
Table 9:
The Spectrum Scan Screen
Center
Enter the center frequency for the scan, in megahertz
(MHz).
Scan
Enter the bandwidth of the scan, in megaherts. For
example, if you set a
Center
frequency of 645MHz and
a
Scan
bandwidth of 15 MHz, the system will scan the
band 637.5~652.5 MHz.
Apply
Click this to start the scan.
Power (dBmV)
This displays the signal power in decibels relative to one
millivolt.
Frequency (MHZ)
This displays the signal frequency in megahertz.
