HITROL HCC-95P-Ex Series, Инструкция по эксплуатации

Страница: 8 / 28

HCC-95P-Ex Series
HITROL CO.,LTD. 8
Cautions
For
Removal
Wiring
■ Check the level and presence of liquid in the tank before removing it.
■ The product may be overheated so wear gloves to prevent burns.
■ If there is explosive gas in the atmosphere, do not open the cover.
■ To open the cover of an ex-proof product, release the SET SCREW (ex-proof key) first.
■ Disconnect the power first.
■ Make sure that any O-ring or gasket is not damaged while opening or closing
the product cover.
Make sure that it is not subject to any high impact when moving it.
In the case of explosion-proof products, apply power after fastening the cover
after wiring.
■
Connect AC (90–240 V) or DC (24 V) according to the power specifications.
■
Make sure to connect the power with the correct polarity (+, -).
■
Do not connect the wire with the power connected.
■
This product provides DPDT. Wire it with COM and NO terminal to use HIGH contact.
■
Make sure to connect it to an external ground.
If there is an atmosphere of explosive gas and explosive dust, do not open the product cover.