HITROL HCC-95P-Ex Series, Инструкция по эксплуатации

Страница: 12 / 28

HCC-95P-Ex Series
HITROL CO.,LTD. 12
User Training
Warranty
and Contact
■
Warranty and Service
This product is subject to a two-year warranty upon shipment and free service will be
provided for any damage found under normal operating conditions. If troubles that
occur are not due to product failure, service charge will apply.
You can request A/S from our website or by contacting our headquarters.
■
Headquarters, Factory, and Research Center (Contacts)
Address: Hitrol, 141, Palhakgol-gil, Jori-eup, Paju-si, Gyeonggi-do, Republic of Korea
(Palhakgol-gil 98)
HITROL CO., LTD. 141, Palhakgol-gil, Jori-eup, Paju-si, Gyeonggi-do, Korea
TEL.: 031-950-9700 (Headquarters and A/S)
FAX: 031-943-9796–9799 (Headquarters and A/S)
Read and understand the aforementioned and make sure that the temperature of the object
to be measured does not exceed 800℃ for general purpose. For an ex-proof type, the
maximum is 150℃. In addition, make sure that the ambient temperature of the housing is
kept at -20 – +60℃.
An ex-proof product is a pressure-resistance and ex-proof type, so do not open the cover
while using it.
Do not apply a non-ex-proof product in an ex-proof zone.
An ex-proof product can be used where the environment and containers of the
object to be measured are type 1 and 2.
Sensing Probe can be a source of ignition because it operates on the principle
of Capacitance. Therefore, the tank interior is a non-hazardous area and cannot be
used in locations containing flammable products.