19
07.17 207443 Rev.105
EKWXA│EKWXBA
AIR-COOLED WATER CHILLERS
AXIAL FANS
VERSIONS
STANDARD
External fan with 6 pole motor and without compressor insulation
IC
External fan with 6 pole motor and with compressor insulation
Type 1: Basic compressor isolation [2 dB(A) sound level reduction]
Type 2: Compressor isolation << Low Noise >> [6 dB(A) sound level reduction]
SS
External fan of bionic profile and with compressor isolation "low noise"
OPTIONAL
ACCESSORIES / OPTIONAL
CONDENSATION CONTROL
STANDARD, IC y SIL
: Outdoor AC fan with variable speed drive
SS
: Serial Built-in Speed Control
POWERED FAN
Incorporation of EC Electronic Fans of bionic profile with higher available pressure
With this accessory is included the control of condensation of the equipment
SOFT STARTER
Soft starter to minimize peak currents at the compressor start
ELECTRONIC EXPANSION
Expansion of electronic injection valve
HYDRONIC KIT
Option 1
: Pump + Tank + Expansion vessel
Option 2
: Pump + Tank with electrical Expansion vessel
In HEAT mode for low outdoor temperatures, the electric heater is activated as a compressor
support, as long as the compressor is operational
Option 3
: Pump + Expansion vessel
HYDRAULIC CIRCUIT SAFETY
Differential pressure control
Flow Switch
WATER MANOMETERS
Incorporation of manometers for reading the inlet and outlet pipes
VICTAULIC
Exterior water outlet connections of victaulic type
AGGRESSIVE ENVIRONMENTS
Coils with Blygold coating of finned pack
Coils with Aluzinc flap type
Coils with copper fins
COIL PROTECTION
Incorporation of protection grids to prevent impact on the condenser coils
SUPERVISION
External monitoring system
FOR UNIT INSTALLATION
Differential in electrical panel
Independent electrical panel
Operation without neutral
MULTIPLE UNITS
MANAGEMENT
Modular control system via master/slave
FOR SOUND LEVEL
Compressor acoustic insulation
* In addition to these optional consult with our Commercial department for any other configuration or function not described as available.
