Hitech HT884/8, Руководство пользователя

Страница: 23 / 64

Operation
 2012 Hi Tech Systems Limited 17
Selecting multiple devices
To select more than one device for multiple control,
press and hold the shift key while selecting the
devices with the numbered channel selection keys.
Selected devices are indicated by illuminated LEDs.
Note: The device selected first is treated as the Master and
its status (eg PLAY, STOP etc) is shown in the
display. If a different channel is then selected it now
becomes the Master. The Master channel has i
Assigning an external controller
To assign an external controller or automation
system connected to the LOOP port to a control
channel, press and hold the desired channel selection
key for mare than 2 seconds. The VTR status changes
to show LOOP while the time code status changes to -
-:--:--:--.
The HT800 Series VTR and DDR controllers do not
monitor or control the connected VTR and all
commands to and from the connected controller to
the VTR are transparent.
Note: It is not possible to control any other connected VTR
in LOOP mode.
To take control back to the local controller press the
channel selection key again.