HITEC X1 MF, Инструкция по эксплуатации

Страница: 3 / 39

INTRODUCTION
01
X1 MF
Congratulations on your choice of the Hitec X1 MF digital intelligent
charger from Hitec RCD USA.
This unit is simple to use, but the operation of a sophisticated automatic
charger such as the Hitec X1 MF does require some knowledge on behalf
of the operator. These operating instructions are designed to ensure that
you quickly become familiar with its functions. It is important that you read
the Operating Instructions and Warning and Safety Notes before you
attempt to use your new automatic charger for the first time. The X1 MF is
manufactured with the highest quality components for years of reliable
operation, if used properly.
The Hitec X1 MF is a high-performance, microprocessor controlled
charge/discharge station with battery management suitable for use with all
current battery types. The X1 MF also features integrated balancing for
six-cell, Lithium-Polymer (LiPo), Lithium-Iron Phosphate (LiFe/A123) and
Lithium-Ion (LiIon) batteries.
Maximum 10A charge current; maximum 80W charge power; can be
powered by a 12VDC car battery or 100V-240VAC via the built-in switch-
mode power supply.
When a Nickel battery is fully charged, the X1 MF terminates the process
using the Delta-Peak method. Lithium and lead (Pb) batteries are charged
using the Constant Current/Constant Voltage (CC-CV) method.
The system cooling fan operates via an internal temperature sensor,
automatically adjusting its speed for maximum efficiency. The X1 MF also
features a lithium Battery Meter, Motor RPM Tester and Servo Tester. The
LCD display keeps users informed of all the pertinent information during all
functions. Improper use of batteries or chargers is dangerous and can
result in accident, injury, and fire. Please BE SURE to read these
INSTRUCTIONS, WARNING and SAFETY NOTES before you use the
charger for the first time.