HITEC X1 MF, Инструкция по эксплуатации

Страница: 18 / 39

Number
of cells
Battery
voltage
Charging
current
17
X1 MF
LITHIUM BATTERY (LiPo/LiFe/LiIon) PROGRAM
Charged
capacity
Charging
time
- -
+ +
> 3 seconds
SELECT SELECT
Mode
Stop
Press
Dial
Press
Dial
previous screen and verify your settings. If
your settings are correct, there may be a
problem with one or more cells in your pack.
Verify the pack total voltage (from the main
leads) is within normal expected range.
This screen displays the real-time status of the
charge process. Pressing the Mode/Stop
button once will end the charge process and
return you to the setup screen.
Fast charging of Lithium batteries is accomplished by the charger ending
the charge process as the pack voltage nears the maximum levels,
modifying the “CV” portion of the charge process. Normal charging
reduces current to 1/10th during CV, whereas “Fast” only reduces current
to 1/5th the starting value, thus ending earlier. This mode is beneficial
when a quick turn around is needed between race heats or getting back
in the air is more important than having a fully charged battery.
“FAST”CHARGING OF LITHIUM BATTERIES
Top Line (left to right): Selected Battery Type and
Charge Mode
Bottom Line (left to right): Charging Rate and
Pack Nominal Voltage/Cell Count
Adjust the parameters, then press and hold the
dial for 3 seconds to start the process.
This screen displays the number of cells
detected by the charger (R), and the number of
cells you selected in the previous screen (S). If
these numbers mismatch, go back to the
previous screen and verify your settings. If your