22
23
9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
There are a several accessories available for your Aurora transmitter. Check the Hitec web site for information as more
accessories are added to the Aurora and Hitec 2.4GHz system product lines.
Modules
SPECTRA 2.4
Hitec AFHSS 2.4GHz System
Part # 28315
SPECTRA PRO
72MHz Synthesizer
Part # 23772
Transmitter Battery Pack
6 cell, 1300mA NiMH Pack Part # 54128
HPP-22 PC Interface
Used to interface the Aurora with a PC, it will offer a variety of functions including updating the Aurora with future
software versions, Part # 44470
Neckstrap
Many pilots prefer to use a neckstrap when flying. Hitec offers our comfortable strap and swivel snap neckstrap for the Aurora,
Part # 58311
Trainer Cord
The Hitec trainer cord, system can be used to link two Hitec transmitters together for flight training purposes.
Part number # 58321 includes the complete trainer cord assembly.
Gyros
We recommend the Hitec HG-5000 gyro but the Aurora was created to use almost any popular gyro available on the market.
Standard Economy Gyro Pack (HG-5000 Gyro, HSG-5083MG Gyro Servo, Three HS-65HB) Stock # 40105
Standard Metal Gear Pack (HG-5000 Gyro, HSG-5083MG Gyro Servo, Three HS-65MG) Stock # 40103
Pro Heli Pack (HG-5000 Gyro, HSG-5083MG Gyro Servo, Three HS-5065MG) Stock # 40101
Battery Charger
To charge the supplied NiMH transmitter battery.
Use th
e CG-S45 battery charger. Part # 44450 (for 110V)
Use th
e CG-S35 battery charger. Part # 44350 (for 220V )
Servo Installation Wiring
Hitec offers a variety of light and heavy duty servo installation wiring. “Y” harnesses, extensions, small and large switch harnesses
are all available from your hobby dealer.
Receivers
Hitec 2.4GHz System
When using the SPECTRA 2.4GHz System Module, any Hitec Optima series receiver can be used.
Optima 6 Part # 28410
Optima 7 Part # 28414
Optima 9 Part # 28425
72MHz FM PPM and Hitec QPCM Receivers.
The SPECTRA PRO frequency module allows the use of all positive or negative shift 72MHz band receivers.
The Hitec QPCM receiver format is also supported in the Aurora, part # 191721.
Servos
Any brand of modern servo with a 1.5 ms neutral position can be used with the Aurora. This includes any prior, or current
Hitec manufactured servo.
Aurora Transmitter Accessories
Aurora Transmitter Controls
It is strongly recommended to use Hitec “S” Heavy Duty High Channel Switch Harness with
Receiver Charger Cord (Stock # 54407S) for Optima series Receivers.
Warning
Slider Volumes
Side sliders are used as variable controls on several of the functions by default but can be changed if you wish. Like all of the Aurora
controls, you can choose an almost infinite number of control layouts.
1. A, B C, D, E, F, G, H, switchs
2. J1, J2, J3, J4 gimbles
3. Neckstrap hook
4. LS and RS sliders
5. All Digital trims, T1, T2, T3 and T4
6. On-Off switch
1
3
6
4
2
2
5
5
5
5
4
1
