p26
p27
section 7
section 6
Failsafe and Return Procedure [cont.]:
3. If the quadcopter does not regain signal from the transmitter within 2 seconds, the quadcopter enters
Failsafe Mode, and initiates automatic flight control to fly back to the Home Point. The quadcopter will now
continue to hover for 15 seconds and evaluate vertical distance to the Home Point. If the distance is more
than 15 meters, the quadcopter will fly back to the Home Point. If the distance is less than 15 meters, the
quadcopter will fly vertically to a 15 meters height and then return. When the quadcopter reaches the Home
Point, it will hover for 5 seconds and then automatically land.
To ensure the quadcopter successfully flies back to the Home Point when it is in Failsafe Mode, please take-off
only after the quadcopter’s GPS successfully connects to the satellite.
The quadcopter cannot intuitively avoid obstacles in its path when it is flying in the Failsafe Mode.
How to Regain Control on the Transmitter:
When the quadcopter is out of control, toggle the S4 Switch on the transmitter several times to switch the
flight mode. When the signal is restored, the transmitter will regain control and you can continue to use the
transmitter to operate the quadcopter.
Battery Level Alarm Function:
When the quadcopter’s battery is low, it has insufficient power and must land as soon as possible, or else may
lose power completely and crash. In order to prevent danger caused by a low battery, the quadcopter has a
two-level battery alarm function. Level 1 is a Low Power Alarm and Level 2 is a Severe Low Power Alarm that
is indicated by the flight indicator lights. If unable to regain control on transmitter, cycle power to the Q-Cop
450. If the situation continues, turn Off the quadcopter, perform transmitter calibration, and restart the Q-Cop 450.
Flying the quadcopter
using the hitec aee app
Using the Hitec AEE App:
The Hitec AEE App is primarily used to control the quadcopter camera. It can be used to configure video and
camera parameters, controlling the camera angle and for capturing images and videos. It can also display quadcopter
status parameters.
Compatible Mobile Devices:
iOS (system version iOS6.1 or above): Applicable for iPhone 4s, iPhone 5, iPhone 5s, iPhone 5c, iPod Touch 4 and
iPod Touch 5. iPad 3, iPad 4, iPad mini and iPad Air can also be used. [Hitec and AEE will continue to update on future
support for more types of mobile devices.]
Download and Install Hitec AEE App:
To use the Hitec AEE App, please download the app and install it on your mobile device.
1. Ensure your mobile device is connected to the internet
2. Enter the App Store and type “Hitec AEE App” in the search field and search. You will find the
application icon shown in the results.
3. Touch the icon to install the app, and follow the prompts to complete the installation.
Connect to Q-Cop 450 System Network:
Before you start using the app, you need to connect to the HRU System Network.
The specific procedures are as follws:
1. Navigate to the mobile device “Settings” then “Wi-Fi” page.
2. Locate the “HRUXXXXX” network in the list of networks. Your personal HRU Network number is located
on the bottom of the repeater on its own seperate label.
3. Select this network and enter the password. The default password is “HRU12345.”
Staring the Hitec AEE App:
Touch the Hitec AEE App icon to launch it. The app will display the below interface on the mobile device. Touch
“Connect” to establish a connection between mobile device and camera. After connection is successful, the
app will display the preview interface. If connection
fails, you will see the “Connection Error” message.
Please check if your network connection is working
properly, and then try to connect again. If you
receive a phone call on the device while flying the
quadcopter, the mobile device will display the call
screen. Do not answer phone calls while the
quadcopter is flying as it may distract you and
compromise flight safety.
During low-power automatic landing, you can regain control of the quadcopter by switching the flight mode.
However, doing so repeatedly may cause the following:
1. Reduce battery service life due to over discharge.
2. Quadcopter may crash due to insufficient power.
Low Power Alarm
Level 1 Alarm
Level 2 Alarm
4 Arm Indicators Blink Slow [Blinks
ON>OFF in 1sec Intervals]
4 Arm Indicators Blink Fast [Blinks
Twice within 1sec]
Flight Indicator Light Status
Quadcopter flies normally for 3 min and then initiates Level 2 Alarm. Be cautious while
flying, keep the quadcopter within sight and do not fly too high or too far.
Quadcopter flies normally for 3 min and then initiates Failsafe Mode and commences
to automatically land. Under such a situation, please return and land the quadcopter as
safely as possible, and do not push the throttle hard or make big movements during flight.
Low Power Risk Prompt
Содержание AEE Q-COP 450
Страница 1: ......
