Hitachi WH 12DMR Скачать руководство пользователя

Страница: 29 / 47

--- 26 ---

(2) Removal of Front Cap (B)

[5] <1>

and Protector (C)

[6] <2>

Insert a small flat-blade screwdriver between Front Cap (B)

[5] <1>

and Protector (C)

[6] <2>

and remove

them from the Hammer Case

[8] <4>

(3) Removal of the Hammer Case

[8] <4>

and the hammer assembly

Remove the four Tapping Screws (W/Sp. Washer) D4 x 25 (Black)

[7] <3>

that connect the Hammer Case

[8]

<4>

with Housing (A). (B) Set

[35] <32>

and remove the Hammer Case

[8] <4>

and the hammer assembly

from Housing (A). (B) Set

[35] <32>

(4) Disassembly of the hammer assembly

Washer (S)

[16] <13>

Hammer Spring
(D)

[15] <12>

Stopper

[17] <14>

J-297 base for washer (S)

Fig. 9

Mount the hammer assembly onto

the J-297 base for washer (S).

With a hand press, push down the

top of Spindle (D)

[18] <15>

compress Hammer Spring (D)

[15]

<12>

. In this position, remove the

Stopper

[17] <14>

with a small flat-

blade screwdriver, then release the

hand press. (See Fig. 9.)

Remove the hammer assembly from the J-297 base for washer (S) and support the end surface of Spindle (D)

[18] <15>

. With a hand press, push down either of the raised faces of Hammer (D)

[12] <9>

to compress

Hammer Spring (D)

[15] <12>

. In this position, extract the two Steel Balls D5.556

[11] <8>

from the cam

grooves of Spindle (D)

[18] <15>

and Hammer (D)

[12] <9>

with a small flat-blade screwdriver. Then, slowly

release the hand press and lift Hammer (D)

[12] <9>

and Washer (S)

[16] <13>

together to extract them from

Spindle (D)

[18] <15>

. Hammer Spring (D)

[15] <12>

can then be removed.

Steel ball guide groove

Spindle (D)

[18] <15>

Hammer (D)

[12] <9>

Raised face of hammer

Top of spindle cam

Steel Ball D5.556

[11] <8>

Fig. 10

(5) Removal of the Hook Ass'y

[40] <38>

Remove the Special Screw M5

[48] <46>

with a flat-blade screwdriver or a coin and remove the Hook Ass'y

[40] <38>

and the Hook Spring

[47] <45>

Spindle (D)

[18] <15>

Push down.

Содержание WH 12DMR
















































Результаты поиска

Содержание WH 12DMR

Отзывы:

Похожие инструкции для WH 12DMR

Бренды по названию

Популярные бренды

Hitachi WH 12DMR, Технические данные и руководство по обслуживанию

Результаты поиска

Содержание WH 12DMR

Отзывы:

Похожие инструкции для WH 12DMR

Бренды по названию

Популярные бренды