Hitachi VT-FX540E, Руководство пользователя

Страница: 14 / 20

14
EN
Auto Return
When timer recording is finished, the VCR will automatically
rewind the tape to the beginning where it started recording. If
there are any remaining programmes including Daily,
Everyday, & Weekly, AUTO RETURN will not operate.
Press the MENU button.
Press the PLAY/
o
or STOP/
L
button repeatedly to point to
“SET UP”, then press the F.FWD/
B
button.
Press the PLAY/
o
or STOP/
L
button to point to “AUTO
RETURN”, then press the F.FWD/
B
button.
[ON] will appear next to “AUTO RETURN”.
Press the MENU button.
WATCH THE RECORDED TIMER PROGRAMME
Press the OPERATE button to turn on the VCR, then press
the PLAY button.
4
3
2
1
PDC (Programme Delivery Control)
The PDC system looks for the start signal several hours
before published start time and for several hours afterwards.
This means that if the programme is broadcast anytime dur-
ing this period it will be recorded correctly.
Please note that if you have set an incorrect TIMER setting, it
will stay in the memory until you cancel it (see page 13 for
details on how to cancel a programme).
• If a tape is not in the VCR, timer recording cannot be per-
formed and the indicator flashes. If an erase-prevention
tab of the tape is missing, the tape will be ejected and the
indicator will flash. Please insert a recordable tape.
• When all the Timer Recordings are completed, the indicator
also flashes. To play or eject the recorded tape, press the OPER-
ATE button first, and then press the PLAY or EJECT button.
• The TV that is connected to your VCR may be turned on or
off when the VCR is in the Timer-recording mode.
• The VCR will only perform a timer recording after it has been
placed into standby mode.
Parents Lock
Parents Lock prevents use of the VCR by making the VCR fea-
ture buttons on the VCR and the remote control inoperative.
• The “PWR.” indicator on the display comes on.
Press and hold down the OPERATE button on the remote
control for 5 seconds until “PL” appears on the display. The
Parents Lock is activated.
When you want to cancel it, press and hold the
OPERATE button on the remote control again for 5 seconds.
When Parents Lock is activated:
• The time will appear on the display. PL will appear on the dis-
play for two seconds every minute.
• You may insert a tape. However, the VCR power will remain off.
• You may press the EJECT button to remove the tape (unless a
timer recording is programmed or has finished.)
• Timer recording will take place as scheduled, even if Parents
Lock is activated. “P.L.” will appear steadily on the TV screen
during the timer recording.
1
QUICK-FIND
Press the QUICK-FIND button.
TO SKIP TO THE BEGINNING OF NEXT PROGRAMME
Press the QUICK-FIND button.
TO VIEW AT NORMAL SPEED
Press the PLAY button. The Quick-Find is cancelled.
NOTES:
• This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in progress,
press the STOP button.
• When the end of a tape is reached during the Quick-Find, the
tape will automatically rewind to the beginning. After rewinding
finishes, the VCR will eject the tape and turn itself off.
1
This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• Use the remote control for this procedure.
• The tape must be fully rewound.
Search Functions
TIME SEARCH
• The index mark will be made automatically when the
REC/OTR button is pressed. It will also be marked at the
starting point of Timer recording and OTR.
• The index mark is not recorded if the PAUSE/STILL button is
pressed and released during recording.
• The time gap between index marks on the tape should be
greater than 1 minute for SP recording and 2 minutes for LP
recording.
• Use the remote control for this procedure.
Press the SEARCH MODE button.
Press the PLAY/
o
or STOP/
L
button repeatedly until the num-
ber of programmes that you want to skip appears.
Press the REW/
s
or F.FWD/
B
button.
The VCR begins rewinding or fast forwarding to the begin-
ning of desired programme.
When the preset programme is reached, the VCR will start play-
back automatically.
NOTES:
• Index Search can be set up to 20.
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds, from steps
to . Otherwise the Index Search mode will be cancelled.
• To exit the Index Search mode, press the MENU button in step
. Or press the STOP/
L
button after step .
3 2
3 2
3
2
1
INDEX SERACH
If a tape includes both programmes recorded in the PAL system
and ones recorded in the NTSC system, this function may not be
operated correctly.
• Use the remote control for this procedure.
Press the SEARCH MODE button twice.
Press the PLAY/
o
or STOP/
L
button repeatedly until the
desired time appears.
Press the REW/
s
or F.FWD/
B
button.
The VCR begins rewinding or fast forwarding to the specified
point.
When 0:00 is reached, the VCR will start playback automatically.
NOTES:
• Time Search can be set up to 9 hours 59 minutes (9:59).
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds, from steps
to . Otherwise the Time Search mode will be cancelled.
• To exit the Time Search mode, press the MENU button in step
. Or press the STOP button after step .
3 2
3 2
3
2
1
HG467BD.qx4 04.10.25 9:53 AM Page 14