Hitachi VSP F1500, Руководство пользователя

Страница: 150 / 326

Complete one of the following:
• For
Create New , enter values for Number of Snapshot Data per
Primary Volume , Prefix , and Initial Number , and then select
Snapshot Group Configuration .
• For Use Existing , select Snapshot Group Configuration , and then
select the snapshot group to which you want to assign the pair from
the
Available Snapshot Groups table. If you select All , enter a
value in Number of Snapshot Data per Primary Volume .
Note: To create pairs and assign the pairs to a snapshot group by
using CCI, see Creating Thin Image pairs and defining them in
snapshot or consistency groups using CCI on page 134 .
14. Click Add .
The selected LDEV is moved to the Selected Primary Volumes table.
15. Click Next .
16. From the Available LDEVs table, select the LDEV you want to assign as
the S-VOL, and then click Set .
The selected LDEV is displayed in the Secondary Volumes column of
the Selected Pairs table.
Note:
• The nondisruptive migration volumes do not appear in the
Available Primary Volumes table.
• If you select a capacity in Capacity , the Available LDEVs and
Selected Pairs tables display the LDEVs that match the
selected capacity.
• If you select a row in the Available LDEVs table and a row in
the Selected Pairs table and then click Set , you can configure
a pair.
17. Click Finish , and then confirm the settings.
18. Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the
following:
\ / : , ; * ? " < > |
19. If you want to monitor the task after submitting it, select Go to tasks
window for status .
20. Click Apply to submit the task.
Related references
• Create TI Pairs window on page 251
150 Managing Thin Image Pairs
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series