3 - 13
<< DATA WRITING >>
START TO SEND DATA. (Y/N)
Screen for verifying writing of spot noise data
FINISHED WRITING DATA
PRESS ANY KEY
Spot noise data write complete
Input Y.
9.
Spot Noise Adjustment Procedure
The following explains the adjustment procedure using the adjustment program (SMAP), following the order of items on PC
display.
Refer to "4. Starting Adjustment Program (SMAP)" in advance, start SMAP and display the main menu on PC display.
In actual work, it is possible to adjust one item independently.
Note: If error message appears on PC display during adjustment, perform troubleshooting, referring to "10. Error Messages".
Important:
Spot noise refers to bright points that appear on the screen, which are caused by a defect in pixel of CCD image sensor.
Perform this adjustment after specified components have been replaced (see "List of Adjustment Items").
Perform this adjustment if spot noise occurs under abnormal usage conditions or after long-term use.
If spot noise still occurs after this adjustment is complete, the CCD image sensor may be defective.
Perform this adjustment after completing all other adjustments. (Perform this adjustment in normal video status.)
Main menu
***********************************************************
MANUAL ADJUSTMENT PROGRAM
***********************************************************
[A]
DATA INITIALIZE
[B]
ELECTRIC VOLUME
[C]
ADJUSTMENT
[D]
AUTO FOCUS
[E]
SPOT NOISE
[ESC] END
Please select [A] - [F] or [ESC]
Input E.
Follow the instructions on PC display
thereafter.
9.1
Spot Noise Adjustment
Incompleted Phenomenon:
Spot noise occurs under abnormal usage conditions or after long-term use.
Equipment:
Color video monitor (CRT type is desirable)
Condition:
Cap the lens (so that no light enters).
Procedure:
1)
Input E to PC on the main menu screen.
2)
Follow the instructions on PC display thereafter.
3)
The screen for verifying writing of spot noise data will appear: Input Y. (*1)
4)
When writing data is complete, the spot noise data write complete screen
will appear: Press any key to restore the main menu screen.
*1:
Entering N on the screen for verifying writing of spot noise data will
restore the main menu screen.
