Mode
Category
Description
Default
MCU/RCU
908
Universal
Replicator
This SOM can change CM capacity allocated to MPBs
with
different
workloads.
Mode 908 = ON:
The
difference
in CM allocation
capacity among MPBs with
different
workload is
large.
Mode 908 = OFF (default):
The
difference
in CM
allocation capacity among MPBs with
different
workload is small (existing operation) .
Notes:
1.
If a CLPR is used by only some MPBs among all
the installed MPBs, set this SOM to ON for the
CLPR to increase CM capacity allocated to the
MPBs that use the CLPR.
Example:
(a) A CLPR only for UR JNLG.
(b) A
configuration
where MPBs and CLPRs are
separately used for Open and Mainframe
systems.
2.
Since CM capacity allocated to MPBs with low
load is small, the performance is
affected
by a
sudden increase in load.
3.
SOM 908 cannot be used with SOM 933. When
SOM 933 is set to ON, the function of SOM 908
is canceled even though SOM 908 is ON.
4.
This SOM is
effective
for a CLPR. Therefore,
when setting this SOM to ON/OFF, select target
"LPRXX (XX=00 to 31)". For example, even when
CLPR0 is
defined
(any of CLPR1 to 31 are not
defined),
select “LPR00”
first
and then set this
SOM to ON/OFF.
OFF
Both
System option modes
Appendix B: System option modes
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
329
Содержание Virtual Storage Platform F400
