background image

Mode

Category

Description

Default

MCU/RCU

901

Dynamic

Tiering

By setting this SOM to ON or OFF, the page allocation

method of Tier Level ALL when the drive type of tier1

is SSD changes as follows.

Mode 901 = ON: 

For tier1 (drive type is SSD), pages

are allocated until the capacity reaches the limit.

Without consideration of exceeding performance

limitation, allocation is done from highly loaded

pages until reaching the capacity limit
When the capacity of tier1 reaches the threshold

value, the minimum value of the tier range is set to

the starting value of the lower IOPH zone, and the

maximum value of the lower tier range is set to the

boundary value.

Mode 901 = OFF (default): 

For tier1 (drive type is

SSD), page allocation is performed based on

performance potential limitation. With consideration

of exceeding performance limitation, allocation is

done from highly loaded pages but at the point when

the performance limitation is reached, pages are not

allocated any more even there is free space.
When the capacity of tier1 reaches the threshold

value, the minimum value of the tier range is set to

the boundary value, and the maximum value of the

lower tier range is set to a value of 

boundary-value

 ×

110% + 5 [IOPH].

Notes:

1.

This SOM is applied when pages with the

maximum capacity need to be allocated to tier1

(drive type is SSD) with Dynamic Tiering.

2.

When Tier1 is SSD while SOM 901 is set to ON,

the 

effect

 of SOM 897 and 898 to the gray zone

of Tier1 and Tier2 is disabled and the SOM 901

setting is enabled instead. In addition, the

settings of SOM 897 and 898 are 

effective

 for

Tier2 and Tier3.

3.

The following is recommended when applying

SOM 901.
actual I/O value (total number of I/Os of all

tiering policies) < performance potential value

of Tier1* × 0.6
* The performance potential value of Tier1

displayed on Monitor information by using Dx-

ray.

OFF

-

System option modes

Appendix B: System option modes

System Administrator Guide for VSP Gx00 models and VSP Fx00 models

327

Содержание Virtual Storage Platform F400

















































































































































































































































































































































































Отзывы: