16
ENGLISH
CONNECTION (continued)
2. Connect your External Equipment (if any) to the Unit (continued)
Connecting to PC
The
PC connection
terminal (D-sub 15 pin) + the
PC (RGB)/DVI Analogue Audio Input
terminal are connected
to the PC, allowing an analogue RGB signal.
How to connect from terminals on the Control panel (on the underside) to external equipment
To insert D-sub 15 pin, tilt the monitor forward and bring the terminals into view. 2 people are required to hold the
monitor and insert D-sub 15 pin safely. Be careful not to damage the panel.
* You may wish to leave an optional D-sub 15 pin extension cable connected to this terminal to make future
connections easier.
AUDIO
[Example]
IN
OUT
D-sub 15 pin
AUDIO
[Example: Connecting to PC]
3. Attach Cushion, Secure with Clamps and Fit Terminal Cover
1
Attach the supplied cushion around the HDMI cable.
2
Unfasten 2 clamps, and then connect the HDMI cable and power cord
to the monitor through open clamps.
Attach the cushion around
the HDMI cable so as not
to leave any clearance.
Cushion
(supplied
accessory)
HDMI cable
Clamp
*
*
HDMI cable
Power cord
[Example: 32 inch model]
or
[Example: 32 inch model]
