Hitachi UST-9124 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 56

background image

-20-

MN1-1162 Rev. 21

4-4. Connecting to ultrasound diagnostic instrument

The lock lever of the connector moves over the range shown in the figure at

right.

Align the ○ mark with the LOCK or RELEASE position, and lock or release

the probe connector.

Connect the probe to the electronic probe connecting socket of the diagnostic

instrument ( probe connector ) by following the procedure below.

• Connection procedure

The probe is connected when in one of the following states.

• The power switch is set to OFF.

• The image displayed on the ultrasound diagnostic instrument is

frozen.

Before inserting the probe into the probe connector, check that the connector

pins are not bent.

1. Turn the connector lock lever to align the ○ mark on the lever with the

RELEASE position.

2. Firmly insert the connector into the probe connector on the ultrasound

diagnostic instrument.

3. Turn the lock lever clockwise by 1/4 turn until the ○ mark is aligned with

the LOCK position.

4. Check that the connector is firmly inserted into the probe connector on

the instrument.

This completes connection of the probe.

Caution

If there is resistance when trying to turn the lock lever when connecting the connector, do not forcibly

try to connect it. Instead, correctly perform the steps for connecting the connector and firmly insert

it into the probe connector.

Forcibly turning the lever may damage the connector and the probe connector on the instrument.

Lock lever

Movable

range

Probe

connector

○ mark

«
...
24
25
26
27
28
...
»

Содержание UST-9124

























































Отзывы:

Нет отзывов

Похожие инструкции для UST-9124

Бренд: Qingdao H.Y Страницы: 6

Бренд: Obdstar Страницы: 42

Бренд: iHealth Страницы: 8

Бренд: Labnet Страницы: 12

Бренд: Lalizas Страницы: 12

BOBCAT 130 Series

Бренд: Balcrank Страницы: 12

Бренд: Abus Страницы: 8

Бренд: Ultratune Страницы: 12

Бренд: EzCAP Страницы: 15

Бренд: Garmin Страницы: 2

Бренд: Kaiweets Страницы: 6

Бренд: Kaiweets Страницы: 6

Бренд: Woods Страницы: 54

Бренд: Delfield Страницы: 24

MHL 108 WASH 150.509

Бренд: Beamz Страницы: 32

Бренд: SYNBIOSIS Страницы: 2

Blue Bullet 1302-BAS

Бренд: BendPak Страницы: 68

Бренд: Baileigh Industrial Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды