Hitachi UST-5550 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 60

background image

-33-

MN1-5575 Rev. 11

5-6. Manual cleaning and disinfection

Prepare following items before manual cleaning and disinfection.

A). Probe

1) Detergent: ENZOL

®

/Cidezyme

®

(Johnson & Johnson, #2258) or another cleaning agent with approved

material compatibility for this medical device.

2) Disinfectant: Cidex

®

OPA (Johnson & Johnson, # 20391) or another disinfectant with approved material

compatibility for this medical device.

3) 2 tanks, 1 for cleaning and 1 for disinfection - optional: 1 additional tank for rinsing with deionized/

tap water. (sufficient size for immersion of the submergible part of the probe at full length)

4) Soft, fluff free cloth or single use towel

5) Personal protective equipment (gloves, water repellent protective skirt, face protection mask or

protective glasses see also instructions of the manufacturer for the detergent and the disinfectant)

B). Protect tube MP-2485B

1) Detergent: ENZOL

®

/Cidezyme

®

(Johnson & Johnson, #2258) or another cleaning agent with approved

material compatibility for this medical device.

2) Disinfectant: Cidex

®

OPA (Johnson & Johnson, # 20391) or another disinfectant with approved

material compatibility for this medical device.

3) Cleaning brushes if applicable, i.e. REF 09098, Interlock (for cleaning the entire surface of the tube,

the holder and the cap); i.g. REF 09332, Interlock (cleaning the lumen of the protective tube)

4) 2 tanks, 1 for cleaning and 1 for disinfection - optional: 1 additional tank for rinsing with deionized/

tap water. (sufficient size for immersion of the submergible part of the probe at full length)

5) Soft, fluff free cloth or single use towel

6) Personal protective equipment (gloves, water repellent protective skirt, face protection mask or

protective glasses, see also instructions of the manufacturer for the detergent and the disinfectant)

«
...
37
38
39
40
41
...
»

Содержание UST-5550





























































Отзывы:

Нет отзывов

Похожие инструкции для UST-5550

NUFLO Scanner 2000 microEFM

Бренд: Cameron Страницы: 8

Бренд: WAGO Страницы: 96

Бренд: Velleman Страницы: 96

Бренд: VELOCICALC Страницы: 10

Бренд: Valcom Страницы: 1

Dusty Harp Pickup Series

Бренд: Dusty Strings Страницы: 5

Бренд: WIKA Страницы: 88

Бренд: PCE Health and Fitness Страницы: 11

Бренд: Kawai Страницы: 72

ACCURE 2350-GAS

Бренд: ROOTECH Страницы: 26

Бренд: THORLABS Страницы: 49

RHEASREG KLSW-3

Бренд: S+S Regeltechnik Страницы: 32

AirCon Service Mini Identifier R-1234yf

Бренд: Waeco Страницы: 132

Бренд: Oceanic Страницы: 9

Бренд: Valor Страницы: 42

Бренд: KLINGER Страницы: 20

Roast Alert/3 ET-8C

Бренд: Redi-Chek Страницы: 3

AquaShock 850046K

Бренд: Sper scientific Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды