Hitachi UST-5550 Скачать руководство пользователя страница 20

Страница: 20 / 60

-14-

MN1-5575 Rev. 11

2-3. Performance

For measurement tolerances, operating tolerances and other data, refer to the instruction manual for the

ultrasound diagnostic instrument.

2-4. Name of each parts

Cable

This cable propagates the

ultrasonic signals that are

sent and received.

Caution

Do not pull, bend, twist, or apply excessive force to the cable.

The conductors may break and the cable may become unusable.
Do not subject the ultrasonic radiation part to hard impact.

The impact may cause damage to the transducer, and that results in noise or no echo in the image.

In most cases, the ultrasonic radiation part itself is not damaged because the part is made of elastic

material. .
Do not bend or twist it unnecessarily and frequently.

This could make the probe unusable.

While bending the deflection portion, set free the angle knob.

Bending it while it is locked could make the probe unusable.

Angle markers

The angle marker is a white
line that indicats the angle

of deflection portion.

Connector

This is the part

that connects

the ultrasound

diagnostic

instrument and

probe. Follow the

instructions in

section 4-2.

Lock lever

This part make the angle knob

fixed any direction.

Protect tube

Protects the probe from the
external tube of trocar.

Angle knob

This part is used to operate

the deflection portion.

Cap

The cap eliminates the gap

with the probe and keeps

airtightness.

Operating head

When using the probe, hold
this part by hand.

Deflection portion

Operating the angle knob allows
this part to be bent in any desired
direction.

Insertion tube

The part is inserted into the pa-

tient's body with the

ultrasonic

irradiation area and

deflection

portion.

Ultrasonic irradiation area

This incorporates an

electronic linear transducer.

Near the deflection portion

corresponds the front mark

(direction mark) on the im-

age display.

Содержание UST-5550





























































Результаты поиска

Содержание UST-5550

Отзывы:

Похожие инструкции для UST-5550

Бренды по названию

Популярные бренды

Hitachi UST-5550, Инструкция по эксплуатации

Результаты поиска

Содержание UST-5550

Отзывы:

Похожие инструкции для UST-5550

Бренды по названию

Популярные бренды