manualshive.com logo in svg

Hitachi RX, Инструкция по эксплуатации

На нашем веб-сайте вы можете бесплатно скачать инструкцию по эксплуатации для продукта Hitachi RX. Этот руководство поможет вам правильно использовать и ухаживать за вашим устройством. Скачайте его с {веб-сайта} прямо сейчас и ознакомьтесь со всеми функциями этого продукта.

Поделиться
Скачать
background image

(4) 

●

Safety Precautions

SAFETY PRECAUTIONS 

(Continued)

WARNING

●

 When charging a refill of ink or makeup, exchanging ink, or otherwise 

handling ink or makeup, take enough care not to spill ink or makeup.
If you spill any ink or makeup by mistake, wipe it off neatly and promptly 
with wiping paper or something similar. Do not close the maintenance 
cover until you make sure that the portion you have just wiped is 
completely dry. 

   You must pay particular attention when you have spilled ink or makeup 

inside the printer and it is not completely dry. Why? Because vapors of 
ink or makeup will stay inside the printer and may catch on or cause a 
fire. 

If you find it hard to wipe the printer when it is turned on, stop it with the 
maintenance cover open. Power it down, and then wipe it off again. 

●

 If you wish to clean the casing of the printer with wiping paper 

impregnated with makeup, be sure to do so with the power off. 

Attempting to clean it when the power is on will cause makeup or vapors of 
makeup to enter the printer, possibly catching on or causing a fire. 
When the cleaning is over, open the maintenance cover and make sure that no 
makeup has entered and no vapors remain inside. 

●

 Should you find a leak of ink or makeup inside the printer while the 

printer is running or being maintained, wipe it off promptly with wiping 
paper or something similar. Then, with the maintenance cover open, 
stop the printer, power it down, and repair the leak. 

Continuing operation with a leak of ink or makeup will cause an anomaly, 
resulting in abnormal printing. 
Ink and makeup are flammable. They may therefore catch on or cause a fire.

●

 If you wish to receive ink particles in a beaker, for a printing test for 

example, use an electrically conductive beaker and connect the beaker 
securely to the ground. 

   Do not let the tip of the printing head enter the beaker. 

Ink particles used for printing are electrically charged. An ungrounded beaker 
has a gradually rising charge, possibly catching on or causing a fire.

●

 Ensure that all electrical wiring,  connections and grounding comply with 

applicable cords.  Properly connect the printer to its dedicated ground.

   Complete the above procedure to avoid electrical shock hazards.

●

 When welding, keep enough space between the IJ printer and the 

   welding work area to prevent the arc from starting a fire. Also, be sure to 

insulate the printhead and IJ printer frame to keep the welding current 
from flowing to the control section of the printer, and to make a separate 
ground connection for the printer.

Содержание RX





























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RX

Canon i 320 Simplified Manual preview
i 320
Бренд: Canon Страницы: 18
Canon G1020 Series Getting Started preview
G1020 Series
Бренд: Canon Страницы: 16
Canon CX-G2400 Getting Started Manual preview
CX-G2400
Бренд: Canon Страницы: 39
Canon i455 Series Setup Instructions preview
i455 Series
Бренд: Canon Страницы: 2
Canon i455 Series Quick Start Manual preview
i455 Series
Бренд: Canon Страницы: 73
Canon i70 Series Quick Start Manual preview
i70 Series
Бренд: Canon Страницы: 29
Canon i550 Parts Catalog preview
i550
Бренд: Canon Страницы: 16
Canon i475D Series Printing Manual preview
i475D Series
Бренд: Canon Страницы: 44
Canon G3410 Getting Started preview
G3410
Бренд: Canon Страницы: 60
Olympus P 400 Easy Printing Manual preview
P 400
Бренд: Olympus Страницы: 236
Canon I450 - i 450 Color Inkjet Printer Simplified Manual preview
I450 - i 450 Color Inkjet Printer
Бренд: Canon Страницы: 13
Canon iR1018 Portable Manual preview
iR1018
Бренд: Canon Страницы: 86
Canon iR1018 Installation Procedure preview
iR1018
Бренд: Canon Страницы: 20
Saxxot CRU-158 Operation Manual preview
CRU-158
Бренд: Saxxot Страницы: 13
olympia electronics A-200 Manual preview
A-200
Бренд: olympia electronics Страницы: 4
Datamax ST-3210 Programmer'S Manual preview
ST-3210
Бренд: Datamax Страницы: 26
Z Corporation Spectrum Z 510 Hardware Manual preview
Spectrum Z 510
Бренд: Z Corporation Страницы: 76
Canon PIXMA iP4910 Getting Started preview
PIXMA iP4910
Бренд: Canon Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды