12.3.3 Icons for the room thermostat view
Icon
Name
Values
Explanation
Manual/Auto
mode
Manual mode
Auto mode with timer setting
Auto mode without timer setting
Setting/Room
temperature
Setting temperature
Room temperature
End of timer
period
The end hour of the timer period is indicated below this icon
End of holiday
period
The end hour of the holiday period is indicated below this icon
Setting
temperature
This icon appears while the setting temperature is being changed, and indicates the actual temperature
Next screen
When room thermostat has been configured for both circuit 1 and 2, this icon appears at the right side of the
screen to indicated that there is a 2nd room thermostat view
13 MAIN SAFETY DEVICES
Compressor protection
High pressure switch:
This switch cuts out the operation of the compressor when the discharge pressure exceeds the setting.
Fan motor protection
When the thermistor temperature is reached to the setting, motor output is decreased.
The other way, when the temperature becomes lower, limitation is cancelled.
Model
RASM-2VRE
RASM-3VRE
For compressor
Pressure switches
-
Automatic Reset, Non-Adjustable (each one for each compressor)
High
Cut Out
MPa
4.15
Cut-In
MPa
3.20
Low
Cut-Out
MPa
0.30
for control
Cut-In
MPa
0.20
Fuse on PCB
-
1~ 230V 50Hz
A
25
25
CCP Timer
-
Non-Adjustable
Setting Time
min.
3
For condenser fan motor
-
Automatic Reset, Non-Adjustable (each one for each motor)
Internal Thermostat
For Control Circuit
A
5
Fuse on PCB
For Electrical Heater (Accessory)
A
20
Fuse
MAIN SAFETY DEVICES
PMML0506 rev.2 - 01/2021
26
