Hitachi RAM-36NP2A Скачать руководство пользователя страница 40

Страница: 40 / 87

– 38 –

Step 3: Copy and cancel the reservation schedule.

[Delete one day reservation]

1. Press

(WEEKLY) button to select Mode A or Mode B.

2. Press

(WEEKLY) button for 3 seconds to start editing the

reservation schedule.

3. Press

(DAY) button to select a day of the week to edit.

4. Press

(DELETE) button for about 10 seconds. Reservations for all

program numbers will be deleted.

●

If press for a short time, reservation for one program number will be

deleted.

5. After deleting, press

(SEND) button while directing the remote

controller towards the indoor unit for about 3 seconds. Timer lamp on the
indoor unit will blink rapidly.

After beep sound emitted from indoor unit, TIMER lamp will light up.

Please ensure that the TIMER lamp lights up.

●

Reservation will not change if

(SEND) button is not pressed.

NOTE

●

If all reservations in the remote controller were deleted and pressed

(SEND) button, no signal will

be transmitted to indoor unit. TIMER lamp will remain off and no changes will be done to the reservations
stored in the indoor unit.

WEEKLY TIMER OPERATION

[Delete Mode A or Mode B]

1. Press

(WEEKLY) button to select Mode A or Mode B.

2. Direct the remote controller towards the indoor unit and press

(DELETE) button for about 10 seconds while Mode A or Mode B display
blinks.

After beep sound emitted from indoor unit, reservations for Mode A or

Mode B will disappear.

Содержание RAM-36NP2A
























































































Результаты поиска

Содержание RAM-36NP2A

Отзывы:

Hitachi RAM-36NP2A, Руководство по обслуживанию, Страница: 40 / 87

Результаты поиска

Содержание RAM-36NP2A

Отзывы: