manualshive.com logo in svg

Hitachi RAM-36NP2A, Руководство по обслуживанию, Страница: 27 / 87

Поделиться
Скачать
Hitachi RAM-36NP2A Скачать руководство пользователя страница 27

– 25 –

POWERFUL OPERATION

●   

By pressing 

 (POWERFUL) button during AUTO, HEATING, DEHUMIDIFYING, COOLING or FAN 

operation, the air conditioner performs at the maximum power.

●

 

During POWERFUL operation, cooler or warmer air will be blown out from indoor unit for COOLING or 
HEATING operation respectively.

■

 

To start POWERFUL operation

■

 

To cancel POWERFUL operation

●  

Press  

  (POWERFUL) button during operation.

 

“ 

 ” is displayed on the LCD.

 

POWERFUL  operation ends in 20 minutes. Then the system 
automatically operates with the previous settings used before 
POWERFUL operation.

●  

Press the   (START/STOP) button. Or

●  

Press 

 (POWERFUL) button again.

 

POWERFUL operation stops.

 

“ 

 ” disappears from the LCD.

1

NOTE

●

 

When SLEEP mode, ECO mode, SILENT mode or LEAVE HOME mode is selected, POWERFUL 
operation is cancelled.

●

 

During POWERFUL operation, capacity of the air conditioner will not increase

    –  if the air conditioner is already running at maximum capacity. 
  –  just before defrost operation (when the air conditioner is running in HEATING operation).

●

 

After auto restart, POWERFUL operation is cancelled and previous operation shall start.

●

 

For multi model connections, POWERFUL operation may not function depending on operation conditions.

Содержание RAM-36NP2A
























































































Отзывы:

Нет отзывов