Hitachi RAD-18NHA2 Скачать руководство пользователя

Страница: 18 / 22

– 18 –

REGULAR INSPECTION

PLEASE CHECK THE FOLLOWING POINTS BY QUALIFIED SERVICE PERSONAL EITHER
EVERY HALF YEARLY OR YEARLY. CONTACT YOUR SALES AGENT OR SERVICE SHOP.

Is the earth line disconnected or broken?

Is the mounting frame seriously affected by rust and is the
outdoor unit tilted or unstable?

Is the plug of power line

rmly plugged into the socket?

(Please ensure no loose contact between them).

AFTER SALE SERVICE AND WARRANTY

WHEN ASKING FOR SERVICE, CHECK THE FOLLOWING POINTS.

When it does not operate

●

Is the fuse all right?

●

Is the voltage extremely high or low?

●

Is the circuit breaker “ON”?

●

Was the air

lter cleaned?

●

Does sunlight fall directly on the outdoor unit?

●

Is the air

ow of the outdoor unit obstructed?

●

Are the doors or windows opened, or is there any source

of heat in the room?

●

Is the set temperature suitable?

CONDITION

CHECK THE FOLLOWING POINTS

Notes

●

In quiet or stop operation, the following phenomena may occassionally occur,
but they are not abnormal for the operation.

(1) Slight

owing noise of refrigerant in the refrigerating cycle.

(2)

Slight rubbing noise from the fan casing which is cooled and then gradually
warmed as operation stops.

●

The odor will possibly be emitted from the room air conditioner because the

various odor, emitted by smoke, foodstuffs, cosmetics and so on, sticks to it. So
the air

lter and the evaporator regularly must be cleaned to reduce the odor.

●

Please contact your sales agent immediately if the air conditioner still fails to operate normally after the above

inspections. Inform your agent of the model of your unit, production number, date of installation. Please also
inform him regarding the fault.

●

Power supply shall be connected at the rated voltage, otherwise the unit will be broken or could not reach

the speci

ed capacity.

When it does not cool well
When it does not hot well

RAD-18-25-35-50NHA2 (EN3) 18

5/14/14 10:35 AM

Содержание RAD-18NHA2























Результаты поиска

Содержание RAD-18NHA2

Отзывы:

Похожие инструкции для RAD-18NHA2

Бренды по названию

Популярные бренды

Hitachi RAD-18NHA2, Инструкция по эксплуатации

Результаты поиска

Содержание RAD-18NHA2

Отзывы:

Похожие инструкции для RAD-18NHA2

Бренды по названию

Популярные бренды