background image

– 15 –

Suitable Room Temperature

Install curtain or blinds

Ventilation

Effective Usage Of Timer

Do Not Forget To Clean The Air Filter

Please Adjust Suitable Temperature 

For Baby And Children

    Warning

Freezing temperature 
is bad for health and a 
waste of electric power.

!

It is possible 
to reduce heat 
entering the 
room through 
windows.

At night, please use the “OFF or ON timer 
operation mode”, together with your wake up 
time in the morning. This will enable you to 
enjoy a comfortable room temperature. Please 
use the timer effectively.

Dusty air 

fi

 lter will reduce the air volume and 

the cooling ef

fi

 ciency. To prevent from wasting 

electric energy, please clean the 

fi

 lter  every 

2 weeks.

Please pay attention to the room temperature 
and air 

fl

 ow direction when operating the unit 

for baby, children and old folks who have 
dif

fi

 culty in movement.

    Caution

Do not close the room for a long period of 
time. Occasionally open the door and windows 
to allow the
entrance of
fresh air.

!

THE IDEAL WAYS OF OPERATION

RAD-18-25-35-50NHA2 (EN3)   15

RAD-18-25-35-50NHA2 (EN3)   15

5/14/14   10:35 AM

5/14/14   10:35 AM

Содержание RAD-18NHA2























Отзывы: