manualshive.com logo in svg

Hitachi RAD-18NHA2, Инструкция по эксплуатации

Поделиться
Скачать
Hitachi RAD-18NHA2 Скачать руководство пользователя страница 16

– 16 –

FOR USER’S INFORMATION

The Air Conditioner And The Heat Source In The Room

Not Operating For A Long Time

When Lightning Occurs

    Caution

If the amount of heat in the room is above the cooling 
capability of the air conditioner (for example: more 
people entering the room, using heating equipments 
and etc.), the preset room temperature cannot be 
achieved.

!

When the indoor unit is not to be used for a long 
period of time, please switch off the power from 
the mains. If the power from mains remains “ON”, 
the indoor unit still consumes about 10W (depends 
on outdoor unit connected) in the operation control 
circuit even if it is in “OFF” mode.

    Warning

To protect the whole unit during lightning, please 
stop operating the unit and remove the plug from 
the socket.

!

Interference From Electrical Products

    Caution

To avoid noise interference, please place the indoor 
unit and its remote controller at least 1m away from 
electrical products.

!

RAD-18-25-35-50NHA2 (EN3)   16

RAD-18-25-35-50NHA2 (EN3)   16

5/14/14   10:35 AM

5/14/14   10:35 AM

Содержание RAD-18NHA2























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды