Hitachi RAC-18WPD, Руководство по обслуживанию

Страница: 11 / 93

– 5 –
ENGLIS H
MODE SELECTOR AUTO HEAT DEHUMIDIFY COOL FAN FAN SPEED AUTO SILENT LOW MED HIGH START / STOP ECO
Precautions
for
Use
●
Do not put the remote controller in the following places. ●
Under direct sunlight.
●
In the vicinity of a heater.
●
Handle the remote controller carefully. Do not drop it on the fl
oor, and protect it from water.
●
Once the outdoor unit stops, it will not restart for about 3 minutes (unless you turn the power switch off and on or unplug the power cord and plug it in again). This is to protect the device and does not indicate a failure.
●
If you press the MODE selector button during operation, the device may stop for about 3 minutes for protection.
POWERFUL Button
Use this button to set the POWERFUL mode. (
p. 11)
INFORMATION Button
(
p. 26)
ONE TOUCH CLEAN Button
(
p. 16)
ON / OFF TIMER setting Buttons
(
p. 17)
MODE
selector
Button
Use this button to select the operating mode. Every time you press this button, the mode will change from
(AUTO)
➞
(HEAT)
➞
(DEHUMIDIFY)
➞
(COOL) and
➞
(FAN)
cyclically.
SILENT
Button
Use this button to set the SILENT mode. (
p. 12)
AUTO
SWING
(
Vertical)
Button
Controls the angle of the horizontal air defl
ector. (
p. 10)
AUTO
SWING (Hori
zontal) Button
Controls the angle of the vertical air defl
ector. (
p. 10)
WEEKLY
TIMER
setting
Buttons
(
p. 20)
LEAVE HOME Button
(
p. 15)
NAMES
AND
FUNCTIONS
OF
REMOTE
CONTROLLER
ECO
SLEEP
TIMER
Button
Use this button to set the ECO sleep timer. (
p. 18)
FAN POWERFUL SILENT INFO SLEEP TIMER AUTO SWING (VERTICAL) AUTO SWING (HORIZONTAL) LEAVE HOME CLEAN DAY PROGRAM NO.
ON / OFF TIMER TIME OK DELETE COPY / PASTE CANCEL SEND CLOCK
– 6 –
AUTOMATIC
OPERATION
The device will automatically determine the mode of operation, HEAT or COOL depending on the current room temperature. The selected mode of operation will change when the room temperature varies. However, the mode of operation will not change when indoor unit is connected to multi type outdoor unit.
VARIOUS
FUNCTIONS
■
Auto
Restart
Control
●
If there is a power failure, operation will be automatically restarted when the power is resumed with previous operation mode and airfl
ow direction.
(As the operation is not stopped by remote controller.)
●
If you intend not to continue the operation when the power is resumed, switch off the power supply. When you switch on the circuit breaker, the operation will be automatically restarted with previous operation mode and airfl
ow direction.
Note:
1. If you do not require Auto Restart Control, please consult your sales agent. 2. Auto Restart Control is not available when Timer or Sleep Timer mode is set.
■
As the settings are stored in the memory of the remote controller, you
only have to press the
(START/STOP) button next time.
Press the MODE selector button so that the display indicates the (AUTO) mode of operation.
●
When AUTO has been selected, the device will automatically determine the mode of operation, HEAT or COOL depending on the current room temperature. However the mode of operation will not change when indoor unit is connected to multi type outdoor unit.
●
If the mode automatically selected by the unit is not satisfactory, manually change the mode setting (HEAT, DEHUMIDIFY, COOL or FAN).
Press the
(FAN SPEED) button to select AUTO, HIGH, MED, LOW
or SILENT.
Press the
(START/STOP) button.
Operation starts with a beep. Press the button again to stop operation. Set the desired room temperature with the TEMPERATURE buttons (the display indicates the setting). The temperature setting and the actual room temperature may vary depending on conditions. Temperature range can be set between 16°C and 32°C.
START
STOP
1 2 3
Set the desired FAN SPEED with the
(FAN SPEED) button (the
display indicates the setting).
(AUTO)
(HIGH)
(MED)
(SILENT)
(LOW)
11