Hitachi RAC-18WPD Скачать руководство пользователя

Страница: 14 / 93

– 11 –

ENGLIS

POWERFUL

OPERATION

●

By pressing

(POWERFUL) button during AUTO, HEATING, DEHUMIDIFYING, COOLING or FAN

operation, the air conditioner performs at the maximum power.

●

During POWERFUL operation, cooler or warmer air will be blown out from indoor unit for COOLING or

HEATING operation respectively.

■

start

POWERFUL

operation

■

cancel

POWERFUL operation

●

Press

(POWERFUL) button during operation.

“

” is displayed on the LCD.

POWERFUL operation ends in 20 minutes. Then the system

automatically operates with the previous settings used before

POWERFUL operation.

●

Press the

(START/STOP) button. Or

●

Press

(POWERFUL) button again.

POWERFUL operation stops.

“

” disappears from the LCD.

NOTE

●

When SLEEP mode, ECO mode, SILENT mode or LEAVE HOME mode is selected, POWERFUL

operation is cancelled.

●

During POWERFUL operation, capacity of the air conditioner will not increase

–

if the air conditioner is already running at maximum capacity.

–

just before defrost operation (when the air conditioner is running in HEATING operation).

●

After auto restart, POWERFUL operation is cancelled and previous operation shall start.

●

For multi model connections, POWERFUL operation may not function depending on operation conditions.

– 12 –

SILENT

OPERATION

●

pressing

(SILENT) button during AUTO, HEATING, DEHUMIDIFYING, COOLING or FAN

operation, the fan speed will change to ultra slow.

■

start

SILENT

operation

■

cancel

SILENT

operation

●

Press

(SILENT) button during operation.

“

” is displayed on the LCD. Fan speed will be ultra slow.

●

Press

(START/STOP) button. Or

●

Press

(SILENT) button again or

(FAN SPEED)

button.

Fan speed will return to previous fan speed before SILENT

operation starts.

SILENT operation stops.

“

” disappears from the LCD.

NOTE

●

When POWERFUL operation is selected, SILENT operation is cancelled. Fan speed will return to

previous fan speed before SILENT operation.

●

After auto restart, SILENT operation is cancelled. Fan speed will return to previous fan speed before

SILENT operation.

●

During any operation with fan speed

(SILENT), if press

(SILENT) button, fan speed will

not change.

Содержание RAC-18WPD






























































































Результаты поиска

Содержание RAC-18WPD

Отзывы:

Похожие инструкции для RAC-18WPD

Бренды по названию

Популярные бренды

Hitachi RAC-18WPD, Руководство по обслуживанию

Результаты поиска

Содержание RAC-18WPD

Отзывы:

Похожие инструкции для RAC-18WPD

Бренды по названию

Популярные бренды